INITIAL SET2
English 51
Example 1: Setting periods using TIME PERIOD A and
TIME PERIOD B
z TIME PERIOD A settings
Set T1 to 6 AM (6:00)
Set T2 to 11:30 AM (11:30)
Set T3 to 1:30 PM (13:30)
Set T4 to 6 PM (18:00)
z TIME PERIOD B settings
Set T1 to 6 AM (6:00)
Set T2 to 8 AM (8:00)
Set T3 to 2:30 PM (14:30)
Set T4 to 8 PM (20:00)
1 Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2 Turn the jog dial to select “1. INITIAL
SET”, and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
3 Turn the jog dial to select “5. TIME
PERIOD SET”, and then turn the shuttle
dial clockwise.
The <TIME PERIOD SET> screen is displayed.
4 Turn the jog dial to select “TIME
PERIOD A”, and then turn the shuttle
dial clockwise.
“00:” from T1 flashes (indicating the hour).
5 Turn the jog dial to set T1(hours) to “06”
(hours), and then turn the shuttle dial
clockwise.
“:00” from T1 flashes (indicating the minutes).
6 Turn the jog dial to set T1 (minutes) to
“00” (minutes), and then turn the shuttle
dial clockwise.
“00:” from T2 flashes (indicating the hour).
7 Turn the jog dial to set T2 (hours) to
“11” (hours), and then turn the shuttle
dial clockwise.
“:00” from T2 flashes (indicating the minutes).
Timer period settings
MENU
e00_l8hbe_us_7.book Page 51 Friday, April 16, 2004 1:42 PM
To Next Page
Loading...
