RECORD SET3
64 English
SETTINGS
2 Turn the jog dial to select “5. PROGRAM
REC SET”, and then turn the shuttle dial
clockwise.
The <PROGRAM REC SET> screen is displayed with the
cursor positioned on “PROGRAM”.
3 Turn the shuttle dial clockwise.
“P-1” flashes.
4 Turn the jog dial to select a program
number (P-1, for example), and then
turn the shuttle dial clockwise.
The cursor moves to “01” from “SERECT INDIVIDUAL
CAMERA RATE (FPS)”.
5 Turn the shuttle dial clockwise.
“1” (recording rate) flashes.
6 Turn the jog dial to select a recording
rate (3.75, for example), and then turn
the shuttle dial clockwise.
Camera No. 1 is now set to record at a rate of 3.75. The
cursor moves to “02”.
Valid recording rates
30*, 15, 7.5, 3.75, 1.875, 1.0, 0.500, 0.330, 0.250, 0.200,
0.100, 0.050, 0.033 (Unit: FPS)
* A selection cannot be made when pre-alarm recording
has been set to “ON”.
7 Set recording rates for Camera No. 2
and Camera No. 3 in the same way.
8 With the cursor flashing on “04”
(camera number), turn the jog dial to
select “OFF”, and then turn the shuttle
dial clockwise.
Video from Camera No. 4 will not be recorded.
9 Use the same procedure to set Camera
No. 5 and Camera No. 6 to “OFF”.
10 If necessary, use this procedure to
setup other programs (i.e., No. 2
through No. 4).
11 Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT
e00_l8hbe_us_7.book Page 64 Friday, April 16, 2004 1:42 PM
To Next Page
Loading...
