COPY MENU SETTINGS8
98 English
SETTINGS
4 Turn the shuttle dial clockwise.
<WARNING> screen is displayed.
5 Turn the jog dial to select “YES”, and
then turn the shuttle dial clockwise.
The loading process starts.
When this has been completed, “SYSTEM INITIALIZING”
is displayed and the display returns to the normal screen.
z Normally, “COPY RECORDING AREA SETTINGS”
should be set to “NO”. If set to “YES”, hard disk
initialization will be carried out, and all recorded data
will be lost.
e00_l8hbe_us_7.book Page 98 Friday, April 16, 2004 1:42 PM
To Next Page
Loading...
