Sanyo EC-503 - Cooking Rice

COOKING RICE
1. Measuring rice.
Use the provided 180 cc (about
6 oz.) cup for measuring
rice. Make sure that
the rice is leveled
when the cup
is filled.
2. Washing rice before cooking.
Wash rice thoroughly in
a separate bowl until the
water becomes
relatively clear. Avoid
using the Inner Pot to
wash rice as it may damage the Inner
Pot.
3. Adding water.
Place the washed
rice into the Inner
Pot and then add
water in accordance
with the amount of
rice. For example, to cook 3 cups of
rice, fill the Inner Pot with water up to
the number 3 level marker.
Adjust water quantity depending on
the rice and your own preference.
Use the Rice and Water Chart (on
page 8) as a guideline for the amount
of water to use when cooking various
types of rice.
4. Place the Inner Pot into the
cooker.
Make sure that the Inner and Outer
Pots are clean and completely dry and
that there are no foreign objects
inside the cooker.
Turn the Inner Pot
back and forth a few
times to make sure it
sits evenly on the
heating plate.
5. C over the Inner Pot with the Lid.
Make sure that the rice is distributed
evenly in the Inner Pot for even
cooking.
Rice
6. Plug the Power Cord into the
cooker and then into the
electrical outlet.
The yellow front panel Keep Warm
indicator lights.
Note: Do not plug the power cord in
until the rice is ready to cook.
7. Press.the Cooking Switch down.
The red front panel Cook Indicator
lights indicating that the cooker is
now cooking.
8. The Keep Warm setting.
When cooking is complete, the
cooker automatically switches from
the COOK setting to the KEEP WARM
setting. The red front panel Indicator
turns off, and the yellow KEEP WARM
front panel Indicator lights.
9. Let the rice steam.
After cooking, let the rice steam while
covered fori5 minutes in the KEEP
WARM setting.
After steaming, carefully remove the
Lid, while keeping your hands and
face away from the cooker to avoid
the steam.