Automatic Reheating (Cmfd)
EXAMPLE: To reheat 1 cup of soup, you would use Auto Reheat course number “A2” for one serving
To do this follow these steps;
1. Touch STOP/CLEAR.
2. Touch AUTO REHEAT to
select the appropriate auto-
matic reheating course. The
letter “A” will appear in the dis-
play window and the light
above REHEAT will flash.
3. Touch a number (single digit,
1-5) to select the course
desired. Touch number “2” to
select the soup/sauce course
(A2). The course number
“A2” will appear in the display
window. The light above RE-
HEAT will flashing and remain
on. The light above SERVING
will flash. This is to tell you that
you need to enter the number
of servings.
4. Touch a number (single digit,
1-4) to enter the number of
servings to be reheated. Enter
the number of serving of soup
by touching
“l”. The word
“AZ-1” will appear in the dis-
play window. The light above
SERVING will stop flashing
and remain on.
6
,.s::::::
(9
7
,,,.:::::
W!M ‘1~ 8
,,,:,.<:::::::
,::::-4:::::,::,,,,,,,
5. Touch START. The oven will
begin the reheating course you
have selected. You will see the
time “counting down” in the
display window.
6. At the end of the reheating
time, atone will sound and the
word “End” will appear in the
display window for 2 seconds.
The oven shuts off automat-
ically.
NCYTE: If you want to keep the food warm after finishing
the reheating cycle, you can use the “Hold Warm” fea-
ture. For detailed instruction on using the “Hold Warm”
feature, see page 8.
–19–
To Next Page
Loading...
Need help?
General
