What to Do If Repairs Are Needed
Get in contact with your nearest Sanyo Service Centre.
On no account remove or interfere with any parts or
screws. “THIS COULD PROVE VERY DANGEROUS”
Make the following simple check-up before contacting
the Sanyo Service Centre:
● If the interior lamp does not light when the “START”
pad is touched.
1. Make sure that the mains lead is securely plugged
in.
2. Make sure that the door is properly closed.
● If the lamp inside lights but the food is not heated:
Make sure that the food is not completely covered
with a metal container or aluminium foil.
c Noisy operation:
1. Make sure that sparks are not being produced due
to the use of metal utensils.
2. Make absolutely sure that the contents of the oven
are not touching the stirrer shield (oven roof).
–25–
To Next Page
Loading...
Need help?
General
