Sanyo EM-C1901 - Memory Cooking Programs; Programming Memory 1-10; Programming Memory 11-20; Memory Programming Notes

8
This function allows you to program multi-stage cooking.
20 memory banks can be programmed for cooking the most popular dishes.
When choosing the program number from 1 to 10 (0):
To program the cooking for 45 seconds at power level 6 for 1 serving in the memory 4.
Up to three stages on any power level can be programmed for each memory.
Example:
• Programming for memory cooking is completed by pressing memory key. If memory key is not pressed, the new
setting will not be programmed.
• Maximum power operation will automatically be made when you skip steps 3 and 4.
• To program 2-stage or 3-stage cooking, repeat steps 3 to 6.
• In the case of the program number 11 to 20, it can be programmed up to 2-stages. 3-stages can’t be programmed.
Note:
When choosing the program number from 11 to 20:
To program the cooking for 45 seconds at power level 6 for 1 serving in the memory 14.
Up to two stages on any power level can be programmed for each memory.
Example:
PROGRAMMING FOR MEMORY COOKING
KEY OPERATION DISPLAY WINDOW
1
• Press MEMORY key twice.
2
• Press 4 to program into “No. 4”.
• Program number is displayed.
3
• Press POWER key.
4
• Press 6 to select power level 6.
• 6 power level bars are displayed.
5
• Press TIME key.
6
• Enter 45 seconds by pressing 4 and 5.
7
• Press MEMORY key again to complete memorizing.
KEY OPERATION DISPLAY WINDOW
1
• Press MEMORY key twice.
2
• Press PLUS 10 key.
• Press 4 to program into “No. 14”.
3
• Repeat steps 3 to 7 above.