EasyManua.ls Logo

Sanyo EM-X475S - Manual Defrosting; Defrosting Procedure

Sanyo EM-X475S
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MBI L t
16
Manual defrosting
For manual defrosting (without operating the Auto Defrost feature), use 200W. The blue defrost
symbol appears in the window display whenever this power level is selected. To speed up the
defrosting of dense foods over 450g (1lb), the oven may be started on Hi W(1000W) power for
1- 3 minutes, then reduce to 200W until defrosting is complete.
Example: To defrost at 200W for 8 min 30 secs:.
1.
Touch Pause/Clear
2.
Touch the time button.
3.
Set the desired time by pressing buttons
’ 8 ’ , ’ 3 ’ then ’ 0 ’ on the number pad.
4.
Touch the power button.
5.
Set the desired power (200W = 2) by pressing
button ’ 2 ’ on the number pad.
6.
Touch Start
At the end of the defrosting time, the microwave power will automatically stop. The cooling fan
and oven light will continue to run whilst 5 soft audible bell sounds are heard. ’ End ’ will appear
in the display window. After the defrosting time has finished pressing Pause/Clear will reset the
display window to the time of day.

Other manuals for Sanyo EM-X475S

Related product manuals