Sanyo EM800TS User Manual

(
\
SERVICE MANUAL Microwave oven
EM8001”s (Australia)
/
/
L
,.,.
I PRODUCT CODE NO,
432-314.50 ]
L
.,,,
,,!
See the service manual of EM810FS(WM-
640139) except the items described in this
service manual.
This model is the same as the model EM-
81OFS except the stirrer fan.
Foreword
Read this manual carrsfu!ly, ~$pgcially pr~~aution gn
rnimrwave mergy,, and fcrlhw the prorxrdure strictly, Carelessservicing and
testing may expose yourself to the microwave energy leakage.
PRECAUTIONS
PRECAUTIONS TO BE O~SERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EX-
CESSIVE MICROWAVE ENERGY
L
(a)
(b)
(c)
L (d,
Do not operate or allow the oven to be operated with the door open.
Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source,
and make repairs as necessary:
(1) Interlock operation. (2) proper door closing, (3) seal and sealing surfaces (arcing. wear. and other damage~ (4)
damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.
8efore turning on microwave power for any service test or inspection within the microwave generating compartments,
check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connections.
Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and trans
mission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released
to the owner.
,., ..,..
.. . .
REFERENCE NO. WM-640140

Sanyo EM800TS Specifications

General

Brand	Sanyo
Model	EM800TS
Category	Microwave Oven
Language	English

Summary

Safety Precautions

Microwave Exposure Prevention

Guidelines for preventing excessive microwave energy exposure during servicing, including door operation, safety checks, and component integrity.

Circuit Diagram

Wiring Color Codes

Key for understanding wire colors used in the circuit diagram and their corresponding meanings.

Test Procedures

Control Circuit Board Testing

Voltage measurement procedures and expected results for the control circuit board's test points.

Touch Key Board Testing

Resistance measurement procedures for the touch key board's FPC connector terminals.

Exploded View and Part List

Cavity Parts Identification

An exploded view and detailed list of parts for the microwave oven's cavity assembly.

Switches and Microwave Parts

Switches and Microwave Parts Identification

Exploded view and part list for switches, magnetron, and other microwave generation components.

Door Parts

Door Parts Identification

An exploded view and list of parts specifically for the microwave oven's door assembly.

Control Panel Parts

Control Panel Components

Exploded view and part list for control panel parts, including display and touch key board assemblies.

Control Circuit Board

Circuit Board Component Layout

Detailed diagram showing the placement and connections of components on the control circuit board.

Component Parts List

Control Circuit Board Components

Detailed list of part numbers for integrated circuits, transistors, diodes, capacitors, resistors, and miscellaneous parts.

Overall Circuit Diagram

System Electrical Schematic

A comprehensive circuit diagram illustrating the interconnectedness of all major electrical subsystems within the oven.