-15-
ERROR SIGNS
CD Player
If a problem should occur while operating the built-in CD player, one of the following error signs
may be displayed:
Abnormal mechanism function.
Internal connection check error.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
Press the eject button.
Turn the power off and then on again.
If it is not corrected, contact the place
of purchase.
The disc is inserted incorrectly.
The disc is dirty.
The disc is defective.
There is condensation on the
optical lens.
Eject the disc and insert it properly.
Error Sign
Cause
Remedy
Clean the disc.
Use another disc.
Leave the disc player off for an hour
or so, then try again.
To Next Page
Loading...
