-11-
TAPE OPERATION
LOADING AND EJECTING THE TAPE
......................... 1, 2
Insert a cassette into the tape slot
and the tape player will start.
Press the eject button
to eject a tape.
SELECTING TAPE MODE
.......................................... 3
Inserting a cassette into the tape slot as start the tape player. If radio, CD player is in operation with a tape
loaded, press the TAPE button
to switch to tape mode.
SWITCHING THE TAPE DIRECTION
........................... 3
Press the TAPE button
.
When the tape reaches the end of one side, the unit will automatically switch to the opposite side of the tape.
FAST FORWARD AND REWIND
................................. 4, 5
Press the FF + button
to fast forward and press the - REW button
to rewind the tape.
Pressing the TAPE button
during fast forward and rewind operation resumes tape playing.
• Only cassette tapes that play no longer than 90 minutes should be used. Tapes exceeding 90 minutes
are thin and may easily break.
CAUTION
5
3
9
4
2
1
8
7 6
To Next Page
Loading...
