EasyManua.ls Logo

Sanyo HEC-DR5700 - Specifications

Sanyo HEC-DR5700
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
SPECIFICATIONS
Do not use the massager on other than the designated voltage.
230 WPower consumption
30 min.Rated time
WHOLE BODY SENSOR AUTOMATIC COURSES・・・Approx. 15 minutes
(Maximum of approx. 20 minutes due to stiffness detection)
AUTOMATIC COURSES・・・・・・・・・・・・・・Approx. 15 minutes
MANUAL COURSES・・・・・・・・・・・・・・・・Approx. 15 minutes
Timer
730 mm [width]×1,240 mm [depth]×1,220 mm [height]
When upright (with foot rest retracted)
730 mm [width]×1,940 mm [depth]×760 mm [height]
When reclined (with foot rest set horizontally)
Dimensions
Approx. 80 kgWeight
Cord length
Stand, Installation screws (Three)Accessories
Synthetic leatherUpholstery
One up/down pass in approx. 35 sec.
Vertical movement speed
(5 stages) Approx. 60130 mmTapping width
(5 stages) Approx. 60130 mm
Spine stretching width
Partial stretching (Partial): Repetition within Approx. 200 mm
Partial stretching (Focus): Repetition within Approx. 100 mm
Range of partial stretching
Approx. 710 mm
Maasger rollers up/down range
No gradation or 10 mm /one press of button
Height adjustment of massaging rollers
Approx. 120170°Reclining angle
Reclining method
Lower body massaging
(Air pressure)
33 W
Approx. 2,100 mm
Power dissipation of electric heating equipment
Back rest: Motor-driven type (Linked with foot rest)
Foot rest: Motor-driven type (Foot rest only)
(3 stages) Approx. 1938 kPa
There is a slight difference according to the part.
(5 stages) Approx. 1030 times/min.Kneading frequency
(5 stages) Approx. 300600 times/min.
Approx. 4298 times/min.
(5 stages) Approx. 715 times/min.
Tapping frequency
Drum roll frequency
Shiatsu frequency
FINE Course is Approx. 8 minutes

Related product manuals