
Do you have a question about the Sanyo HEC-RX1 and is the answer not in the manual?
Initiates the examination mode by pressing specific buttons simultaneously.
Verifies air-bag inflation sequence by pressing the ON/OFF button.
Initiates the examination mode by pressing specific buttons simultaneously.
Verifies air-bag inflation sequence using the ON/OFF button.
Confirms motor function by operating the PROGRAM "STRETCH" button.
Steps to replace the right arm rest assembly and cover.
Procedure for replacing the main printed circuit board.
Steps to replace the valve assembly and associated components.
Steps for replacing the air pump and transformer PCB.
Procedure to replace the transformer printed circuit board.
Guide to replace the foot rest and back rest reclining motors.
Steps to replace the control unit and its PCB.
Instructions for replacing the power switch and fuse.