To Next PageTo Next PageWhat to do if my Sanyo HEC-A3700 does not operate?
If your Sanyo Massager is not operating, ensure the power plug is securely inserted into the wall outlet. Also, verify that the POWER switch is in the “ON” position. If it still doesn't work, try setting the POWER switch to the “OFF” position momentarily, wait about 3 seconds, and then set it back to the “ON” position.
What to do if my Sanyo HEC-A3700 stopped during operation?
If the operation of your Sanyo Massager stopped while massaging was in progress, set the POWER switch to the “OFF” position momentarily, wait about 3 seconds, and then set it back to the “ON” position.
Why my Sanyo Massager cannot be reclined?
If your Sanyo Massager cannot be reclined or the foot rest cannot be moved, check for any obstructions preventing movement and remove them.
General| Model | HEC-A3700 |
|---|---|
| Category | Massager |
| Frequency | 50/60Hz |
| Power Consumption | 30W |
| Power Source | AC |
| Voltage | 100V |
Instructions on how to safely move the massage chair, considering different scenarios and floor surfaces.
Guidance on choosing an appropriate location, including necessary space for reclining and avoiding interference.
Overview of how to choose between automatic, manual, or leg massage courses for desired treatment.
Guide on adjusting roller position, speed, and width for manual massages to customize the experience.
Instructions on how to reduce massage intensity when it's too strong, or increase it when too weak.
Cleaning instructions for synthetic leather areas, plastic parts, frame, and remote control.
Guidance on resolving common operational problems, error indicators, and abnormal sensations.
Outlines user responsibilities for service and lists items/conditions not covered by the product warranty.
