18
LEG MASSAGING
ADJUSTING MASSAGE INTENSITY
¡The foot rest will lift up slightly.
¡Press the FOOT REST buttons to adjust to the desired angle.
¡If massaging the soles of the feet and the calves, adjust the angle
of the foot rest so that the part of the body to be massaged
touches the foot rest.
¡When the CALF & FOOT button is pressed, massaging will
start at the “Medium” setting.
Each time the button is pressed, the strength of massaging
changes in the order weak – medium – strong - off and the
corresponding indicators illuminate.
¡Place a towel or something similar
over the back rest.
¡
Take off the back pad from the back rest.
q Frip the Head cover to the rear.
w Ta ke off the back pad from the back rest.
Remove the fastener and the hook-and-loop
fastener.
e Flip back the head cover.
2
Adjust the angle of the foot rest.
3
Press the CALF & FOOT button.
1
Press the ON/OFF button.
¡
In addition to simply massaging the legs, you can also use automatic courses and manual massaging at the same time.
When the massage is too strong
When the massage is too weak
Towel or
similar
WARNING
¡Do not raise or lower the foot rest while your feet are enclosed in it for an air
massage.
(Weak) (Medium)
Off
(The indicators switch off)
(Strong)
If you would like to stop massaging before it is finished by timer
Stopping the chair immediately if you feel an abnormal physical sensation or a problem with the chair itself
Press the ON/OFF button.
Press the STOP button.
Page
14
Head cover
Fastener
Fook-and-loop
fastener
Back pad
To Next Page
Loading...
