EasyManua.ls Logo

Sanyo HEC-A3700 - Name and Function of Each Part

Sanyo HEC-A3700
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
GROUNDING METHODS
GROUNDED
OUTLET
GROUNDING
PIN
GROUND
OUTLET BOX
TAB FOR
GROUNDING SCREW
METAL
SCREW
ADAPTER
(A) (B) (C)
Be sure to follow these instructions
This appliance is intended for Household Use Only.
SAVE THESE INSTRUCTIONS
DANGER
WARNING
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having
an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in sketch A
in following figure. A temporary adapter that looks like the adapter illustrated in sketch B and C may be used to connect
this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet in not available. The temporary adapter
should be used only until a properly grounded outlet (sketch A) can be installed by a qualified electrian. The green colored
rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must by held in place by a metal screw.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
This appliance is equipped with a PTC resetting protection device.
This is a safety feature to protect the appliance from overload. If the appliance should suddenly stop
and will not start, turn off the main switch and pull the plug off the socket outlet. Do not operate the
appliance for at least 30 minutes. Failure to turn the appliance off may result in the appliance starting
unexpectedly when the device resets.
At first, do not attempt to recline the seat deeply or lean on the back rest forcibly (until you have
become accustomed to massaging).
If the massaging force is too strong at the outset, it may result in adverse effects or injury.
Do not move the massager while a person is sitting in it.
If this is not observed, the massager may fall over and injury may occur.
Do not sit down or get up from the chair while the foot rest or seat are raised.
If this is not observed, injury may occur.
The maximum permissible weight of the user is 120 kilograms (265 lbs).
Otherwise, an accident may happen or damage to the machine may result.

Related product manuals