6
SPEED ADJUST buttons
WIDTH ADJUST buttons
FOOT REST buttons
POSITION ADJUST buttons
RECLINING buttons
UPPER BODY STRENGTH ADJUST buttons
LOWER BODY STRENGTH ADJUST buttons
SOLE WARMER button
HOME POSITION button
BEST POSITION button
INSTANT STOP button
AUTOMATIC COURSE buttons
COVER
＊
All display icons are shown here
for explanation.
Remote control
OPERATION ON/OFF button
MANUAL (LOWER BODY)
MASSAGE buttons
MANUAL (UPPER BODY)
MASSAGE buttons
MANUAL SELECT button
WHOLE BODY SENSOR AUTOMATIC COURSE buttons
Used to return the back rest, foot rest and seat to
their home positions.
Used to adjust the back rest, foot rest and seat to
the two preset best positions.
Used if you have felt abnormal physical sensation
or want to stop the massager immediately.
Adjusts the strength of upper body massaging
(drum roll) in five stages.
Adjusts the strength of lower body and
air course massaging in three stages.
During the Whole Body Sensor Automatic
Courses, the lower body massaging can
be turned off.
Used for switching the sole heater
operation ON/OFF. (When the heater
switch is “ON”, the lamp is illuminated.)
Open the cover when using
manual massage and when
turning sole massage on and
off.
Used to select the desired type
of lower body air massaging.
Used to select the desired type
of upper body massaging.
Used for manual massaging.
Adjusts the width of the
massaging rollers in five stages.
Adjusts the speed of the massaging rollers in five stages.
Used to select the desired type of Automatic Course.
Used to select the desired type of Whole Body Sensor Automatic Course.
Used for switching the massaging operation ON/OFF.
Used to adjust the UP/DOWN position of massaging rollers.
Adjusts the angle of the foot rest.
Adjusts the angles between the back rest, seat and the foot rest.
The back rest, seat and foot rest are moved in conjunction with each other.
To Next Page
Loading...
