12
ADJUSTMENT OF CHAIR
Before sitting on the massage chair
Head rest
Center of the chair
Foot rest
Back rest
Foot rest
NOTE
Bring all parts of the massage chair to
their home position by pressing the
HOME POSITION button.
1
Install the head rest.
2
Sit on the center of massage chair.
Sit deeply in the massage chair so that the waist
touches the back rest.
3
Adjust the position of the head rest.
During the massage, adjust the head rest so that it does
not touch the shoulders.
4
Press the OPERATION ON/OFF button.
When the button is pressed, the lamps of the sole warmer and
remote control will illuminate, and the sole warmer will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
When the massaging rollers are not located in the upper
section, the massaging rollers will move to the upper section
and stop. (During the movement, the icon of “ORIGIN” on the
remote control flickers.)
Sitting on the massage chair while the foot rest is being raised is
dangerous. Be sure to lower the foot rest completely before sitting on
the massage chair.
The chair will be automatically brought to its home position by
pressing the HOME POSITION button.
Do not attempt to climb onto or off the seat by stepping
on the foot rest. Do not attempt to place anything upon or
sit on the foot rest. The user may fall over, resulting in an
accident or injury.
NOTE
The head rest contains a weight, so do not shake it or
throw it around, otherwise it may cause injury.
For safety, check the position of the
massaging rollers before leaning slowly back
on the massager. Do not twist the body, but
lean straight back on the massager, so that
the massaging rollers are in position on either
side of the spine.
Remove the Hook-
and-loop fasteners
and pass the cord
through.
Align the Hook-
and-loop fasteners.
Hook-and-loop
fasteners
Cord
Press
●
●
●
●
●
●
●
●
●
●
CAUTION
To Next Page
Loading...
