Sanyo HV-DX2E - Specifications

1-6
SPECIFICATIONS
General
Power requirements AC 200-240 V , 50 Hz
Power consumption 23 W
Dimensions (approx.) 430 X 97.5 X 360 mm (w x h x d)
Mass (approx.) 5.3 kg (11.7 lbs)
Operating temperature 5˚C to 40˚C (41˚F to 104˚F)
Timer 24-hour display type
Operating humidity 5 % to 90 %
DVD Specifications
Laser Semiconductor laser, wavelength 650 nm
Signal system PAL
Frequency response DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio More than 100dB (ANALOG OUT connectors only)
Harmonic distortion Less than 0.008%
Dynamic range More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT 1.0 V(P-P) 75 OHMS, SYNC NEGATIVE
AUDIO OUTPUT (DIGITAL AUDIO) 0.5 V(P-P), 75 OHMS, RCA JACK X 1
AUDIO OUTPUT (ANALOG AUDIO) 2.0 VRMS (1 KHZ, 0 DB), 330 OHMS,
RCA JACK (L, R) X 1/SCART(TO TV)
VCR SPECIFICATIONS
Head system 4 heads helical scan azimuth system
Television system PAL (B/G) colour system(HV-DX2EV/HV-DX2SP)
PAL I colour system(HV-DX2E)
Recording format PAL
RF OUT G (HV-DX2EV/HV-DX2SP)
I (HV-DX2E)
RF Modulator UHF 22-68 (Adjustable)
Tape speed PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
NTSC (Playback only); 35.35 mm/s (SP),
16.67 mm/s (LP),
11.12 mm/s (EP)
Maximum recording time SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
Rewind time About 180 min (E-180 tape)
Input level VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
Output level VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, less than 1 kohm
Signal-to-noise ratio VIDEO: More than 43 dB
AUDIO: More than 70 dB
Dynamic range AUDIO: More than 85 dB
Accessory:
Video cable x 1, Audio cable x 1, RF cable x 1, Remote control x 1, Batteries x 2
• Design and specifications are subject to change without notice.