Sanyo ICR-FP600D - Recording at Designated Time; (Timer)

GB-29
RecordingatDesignatedTime(Timer)
Recordingcanbestartedautomaticallyatadesignatedtime.
Beforesetting,checkthattheremainingquantityofbatterypowerissufficient.
1
Inthestopstate,pressthe[ ]
button.
2
Pressthe[ (fast-reverse)]or[ (fast-
forward)]buttontoselect"
"andpress
the[
(play)]button.
3
Pressthe[ ]or[ ]buttontoselect
therecordingtimeandpressthe[
(fast-forward)]button.
 : 30minutes
 : 1hour
 : 2hours
 : Untilallavailablespaceisused.
 : Cancelstimersetting.
4
Pressthe[ ]or[ ]buttonto
designatethehourofrecordingstart
timeandpressthe[
(fast-forward)]
button.
When" "isdisplayedatthelowerrightofthescreen,settingiscomplete.
Oneminutebeforethedesignatedtime,thepowerturnsonautomaticallyand
theunitentersthestandbymodefortimerrecording.
Whenrecordingstartsandthepresettimeelapses,recordingstopsautomatically.
Note  - Ifthedesignatedtimeapproachesduringplayback,playbackstopsautomatically
oneminutebeforethedesignatedtimeandthisunitentersthestandbymodefor
timerrecording.
 - Tostoprecordingduringthetimerrecordingsession,pressthe[
]button.
 - Evenifthepowerisoff,thisunitturnsonatthetimerstarttimeandoperation
commences.Atthetimerendtime,theunitturnsoff.
5
Pressthe[ ]or[ ]buttontodesignatetheminuteof
recordingstarttimeandpressthe[
(play)]button.
gap]vkjcb]cl,glbb07 .6,//,061801801N
K
All manuals and user guides at all-guides.com