Sanyo ICR-FP600D - Setting the Equalizer; Checking the File Information

GB-37
Settingtheequalizer
Adjustthevolumeofhightone/intermediatetone/lowtonetoapreferredlevel
accordingtothetypeofmusic.
1
Turnontheunitandpressandholddownthe[ ]buttonfor
twosecondsormoreinthestopstate.
2
When" "isdisplayed,pressthe[ ]or[ ]buttontoselect
thedesiredcategoryofmusicandpressthe[
(play)]button.
 :Theequalizerisnotused.
:Thelowtonerangeisemphasised.
 :Thelowtonerangeandthehightonerangeareemphasisedslightly.
 :Thelowtonerangeandthehightonerangeareemphasised.
:Theintermediatetonerangeisemphasised.
3
Playafile.(SeePage22)
Settingisnowcomplete.
Note
 Ifthe" "folderorthe" "folderhasbeenselected," "is
displayed.Inthiscase,pressthe[
(fast-reverse)]or[ (fast-forward)]
buttonandthenconducttheoperationabove.
Note
 Thissettingremainsevenifthepoweristurnedoff.
Checkingthefileinformation
Pressthe[ ]buttoninthestopstatetocheckthefileinformationsuchas
date,currenttime,recordingdateandtime,andremainingrecordabletime.The
informationdisplayeddependsontheselectedfolder.
gap]vkjcb]cl,glbb15 .6,//,061801806N
K
All manuals and user guides at all-guides.com