Sanyo JA 226 - User Manual

SERVICE MANUAL
POWER AMPLIFIER
JA 226 sexx
(EUROPE)
SPECIFICATIONS
The below mentioned specifications are mainly based on the |HF measure-
ments standard. They can therefore not directly be compared with specifi-
cations based on the DIN standard or other standards.
Continuous output power ...........
Input sensitivity and impedance
PHONO
CD/VIDEO
Frequency response
Tone control response
BASS ice a eee ae Pa Me
VRE BEE 4 tune hyd alin et ts Sos
Signal to noise ratio
Power requirements
Power consumption
Dimensions (W x D x H)
20W x2
{at 8 ohms, 1.0% distortion)
2.5 mV/47 kohms
150 mV/47 kohms
20 Hz — 20 kHz (CD/VIDEO)
+8 dB (at 100 Hz)
+8 dB (at 10 kHz)
85 dB (CD/VIDEO)
AC: 220 V,50 Hz
130 W
Approx. 420 x 200 x 85 mm
(16-1/2” x 7-7/8" x 3-3/8")
Approx. 3.5 kg (8 Ibs.)
—Specifications subject to change without notice.
WM-15481
AY

Sanyo JA 226 Specifications