94 Section 2F: Using Contacts
Secret Contacts Entries
You can hide an entry’s phone number(s) and require your lock code to edit
the entry by making it secret. The entry name is still displayed, but all other
information is replaced with “<Secret>”.
To make an entry secret:
1. Press > Contacts > Find/Add Entry.
2. Select the Contacts entry you want to tag as secret and press
Options (right softkey).
3. Select Set Secret.
4. Enter the four-digit lock code.
5. Select On.
To make an entry public:
1. Press > Contacts > Find/Add Entry.
2. Select the Contacts entry you want to tag as public and press
Options (right softkey).
3. Select Set Secret.
4. Enter the four-digit lock code.
5. Select Off.
Tip:
If you can’t recall your lock code, try using the last four digits of your
wireless phone number or try 0000. If neither of these works, contact
your service provider.
Note:
Instead of selecting a ringer type, you can also select
Ringer & Voice
,
Vibrate
, or
Normal Ringer
(default) during step 4 in “Assigning a Ringer
Type to an Entry” on page 93.
To Next Page
Loading...
