Section 2H: Using Your Phone’s Voice Services 107
Using Voice-Activated Dialing
You can use a voice dial tag to automatically dial a phone number in your
Contacts. (A voice dial tag is a command you record and use to place calls
without using the keypad.) Your phone can store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice Dial tag into
your phone’s microphone.
Tip:
You can also make a call using voice-activated dialing with the phone
closed. Press and hold the side volume key up or down while in standby
mode, and follow the voice prompts.
Note:
To use the Voice Dial function, you must have stored Voice Dial entries.
(See “Programming Voice Dial Tags” on page 108.)
Note:
Please set the Voice Prompt feature (see page 44) to on before using the
Voice-Activated Dialing so that you can hear the voice instruction from the
phone. The default setting is off.
Voice Services
To Next Page
Loading...
