Sanyo Katana II - Installing the Battery; Removing the Battery

18 Section 2A: Phone Basics
Installing the Battery
To install the Li-Ion battery:
䊳
To install, insert the battery into the opening on the back of the phone
and gently press down until the latch snaps into place.
Removing the Battery
To remove your battery:
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.
2. Press the battery release latch down and remove the battery from the
phone at a 45-degree angle.
2
1
WARNING
Do not handle a damaged or leaking Li-Ion battery as you can be
burned.
2
1