Sanyo LCD-26E30A Owner's Manual

43
APPENDIX
SAFETY NOTE
For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use a trained,
authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to the
installer.
Uninstalling Stand Base (19")
1
Place the LCD TV screen facing down on a
flatsurface place where maintained with soft
materials (such as a blanket) for protecting the
display screen.
2
Pull the stand base out from the cabinet
after push 6 hooks.(A)
3
screwdriver remove screws from stand
mounting inserts (B) before installing stand
base .(For wall mounting).
Uninstalling Stand Base (26"/32"/42")
1
Place the LCD TV screen facing down on a
flatsurface place where maintained with soft
materials (such as a blanket) for protecting the
display screen.
2
Release screw in 4 holes with screw
driver.

Sanyo LCD-26E30A Specifications

General

Brand	Sanyo
Model	LCD-26E30A
Category	LCD TV
Language	English