INSTATLING
AND
UNINSTATTING
STAND
BASE
Through
in installing work, handling with
more than two
people
is recommended
.
I
nrougn In rnslailng worK, nanoilng wrln
mofe Inan two
people
ts recommenoed.
.
When holding
(moving
or
lifting) the
LCD Display, hold the
display's body.
Do not handte the
LCD TV by
holding the
attached accessory
parts
(speakers),
olheMise it may result
in
damage.
.
Before installing,
provide
a desk
(or
a
part
of
il) which is
strong
enough to
support the weight of the LCD TV
and this stand. The
desk
must
be larger than the LCD Display
screen
size. The
desk's surface must
be
flat
and maintained with soft material
(such
as a blanket) for
protecting
the screen
surface.
'
Before
putting
the LCD Display
on the desk, make sure there is
no object
on it. Leaving
any object under lhe
screen may cause damage on the
screen.
.
The LCD TV with this
stand should be installed
on
flat
and
level
place.
Do nol
place
on such as
an
non flai,
unlevel or unstable cart or stand. The
display
may fall,
causing nol
only serious
damage to the
products
but
serious injury to a
person.
N
\\$$$#
For
correct inslallation, mounting and
uninstalling of
the
LCD TV Stand,
it is
strongly recommended to
use a
trained,
authorized technician. Failure lo follow
correct
procedures
could result in
damage to the equipment
or
injury to the installer.
Installinq
Stand Base
'l
elace ttre LCD TV screen facing
down on a flat
I
Secure the
stand lo the TV with
4 screws
surface
olace
where maintained with
sofl
malerials
(such
as a blanket) for
protecling
the
display screen.
Uninstallinq the Stand Base
Place
the
LCD TV screen facing
down on a
flatsurface
olace
where
mainlained with
soft
materials
(such
as a
blanket) for
protecting
the
display
screen.
/
Remoue
screws in
4 holes with
screw driver.
4
To Next Page
Loading...
Need help?
General
