Do you have a question about the Sanyo LCD-42XF7 and is the answer not in the manual?
Screen Size | 42 inches |
---|---|
Display Technology | LCD |
Aspect Ratio | 16:9 |
HDMI Ports | 3 |
Brightness | 500 cd/m² |
Response Time | 6 ms |
Power Consumption | 220W |
Resolution | 1920 x 1080 |
Contrast Ratio | 10000:1 |
Viewing Angle | 178° |
Input Ports | Component, Composite, VGA |
Sound Output | 20W |
General safety guidelines for operating and servicing the TV.
Warnings regarding component replacement for safety.
Block diagram of the main signal processing flow within the TV.
Block diagram illustrating the power supply IC and its connections.
Detailed schematic of the main board, showing component interconnections.
Functional block diagram of the QL6599DTR integrated circuit.
Functional block diagram of the QL6562ADTR integrated circuit.
Functional block diagram of the QFAN7602M integrated circuit.
Functional block diagram of the QRT9711CGB integrated circuit.
Pinout and functional block diagram of the QPS331TQFP64M IC.
Pinout and functional block diagram of the TC4052 analog multiplexer.
Pinout and functional block diagram for the QPCA9536DGKRP I/O expander.
Functional block diagram of the QXXAAJQ1148 IC.
Pinout and functional block diagram of the MST6M16 main processor.
Functional block diagram of the QXXAVC951 IC.
Pinout and functional block diagram of the QXXAVC961M IC.
Overview of the on-screen service menu system for adjustments.
Step-by-step instructions to access the service menu.
Visual guide to the remote control buttons used for service menu navigation.
Guide on navigating and modifying service parameters within the menu.
Table listing service items, initial data, and associated ICs.
Important warnings regarding service adjustments to prevent performance loss.
Procedure for setting initial data, especially after component replacement.
Steps for adjusting white and black balance for picture quality.
Exploded view illustrating the TV's main components for disassembly.
Instructions for safely removing the TV stand.
Procedure for removing the rear cover (lid back).
Steps to remove major internal boards and terminal base.
Instructions for removing the main cabinet back panel.
Procedure for detaching the TV's speakers.
Steps for removing the remote control receiver board.
Top-side layout diagram of the main printed wiring board.
Bottom-side layout diagram of the main printed wiring board.
Top-side layout diagram of the power supply board.
Bottom-side layout diagram of the power supply board.