6
On-screen Service Menu System
General
This set has an On-screen Menu system included in the CPU that allows remote operation for most of the
service adjustments.
■ How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1. Press and hold the MENU button on Side Controls.
2. Keep pressing the MENU button and press “1” button on the remote control, and the FACTORY
MENU will be displayed.
To adjust data:
1) Select “DATA” line by pressing ▲ or ▼button.
■ To exit service mode
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
2) Press ◄►button to adjust data.
Open or close the On-Screen Menu.
MENU button
Side Controls
[ Service Mode Menu ]
Service Mode
Source HDMI1
Properties: BrightnessOffset
Date: 0
Data Value
Version No.
Input Source
V1.280312UH4B32
Item Name
Service Mode
Source HDMI1
Properties: BrightnessOffset
Date: 0
V1.280312UH4B32
To Next Page
Loading...
Need help?
General
