Sanyo LCD-32K40 Service Manual

-13-
On-screen Service Menu System
General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for
most of the service adjustments.
■ How to select the service item and adjust data:
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
■ How to enter the Service Menu
1. Press and hold the MENU button on Side Controls.
2. Keep pressing the MENU button and press the "1" button on the remote control, and the FACTORY MENU
will be displayed.
To adjust data:
1) Select “DATA” line by pressing ▲▼ button.
■ To exit service mode
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
2) Press ◄► button to adjust data.
Open or close the On-Screen Menu.
MENU button
Side Controls
[ Service Mode Menu ]
SERVICE
INDEX-000 575i SUB- CONT
ADDR. 097F
DATA : FA 11111010
Data Value
Item Name
Address
SERVICE
INDEX-000 575i SUB- CONT
ADDR. 097F
DATA : FA 11111010
OK
PS

Sanyo LCD-32K40 Specifications

General

Brand	Sanyo
Model	LCD-32K40
Category	LCD TV
Language	English