Sanyo LCD-32XH4 - Page 22

-22--22-
Mechanical Disassembly
3. Circuit Board Removal
1. Remove 6 screws and take ASSY, PWB, POWER off.
2. Remove 4 screws on the circuit board and then take ASSY, PWB, MAIN off .
3. Remove 4 screws on the circuit board and then take ASSY, PWB, SUB off .
ASSY, PWB, POWER
ASSY, PWB, MAIN
4. Remove 3 screws and take ASSY, PWB, KEY off .
5. Remove 2 screws and take TERMINAL BOARD off .
ASSY, PWB, SUB
ASSY, PWB,
KEY
TERMINAL
BOARD