Sanyo MCH-900F - Programmed Playback Management; Checking and Modifying Programs; Programmed Play Troubleshooting

SERVICE MODE
The unit has four service modes.
e
●
a.
(1)
(2)
After pressing the
OPEhl/CLOSE and RANDOM buttons at the same time, press one of the following . ~
buttons within
one second to enter the corresponding service mode.
I
BIJ?TON
I
SERVICE MODE
I
PLAY / PAUSE
[ KEY WIRING CHECK
PLAY / PAUSE
I LED AND LCD WIRING CHECK
FWD
CD BLOCK ADJUSTMENT MODE
OPEN I CLOSE
CD BLOCK OPERATION DISP~Y
MODE
To cancel the
KEY WIRING
After pressing
service mode, press the POWER button to switch “OFF” the power supply.
CHECK
the OPENfCLOSE and RANDOM buttons at the same time,
press the PLAYIPAUSE button within one second.
The LEDs light and the LCD segments are displayed.
~ ..–. .—. .—..—.. —..—.. —..—.. —..—..—..—..—..—.. —..—..._ ..—..—.._.. _ ..
I
DISC
TRACK
l—
I
//
/ :/
ml
‘HI 1-1-
1
I
II 1 I_
:1 ‘/ :/ /:!
:-
ALL ~
1
RANDOM INTRO
REPEAT :
L ... ... ... ... ... ... ... ... ... ... ... ... ... .. . ... ... ... ... ... ... ... ..J
REW PLAJ ;AUSE ST#P FJD
m
— ;---
INTRO
RANDOM —
OPEN/CLOSE
-11–