Sanyo MCH-900F - Removal and Installation

REMOVAL AND INSTALLATION
●
●
●
●
●
●
a.
b.
This CD-radio-casselte player employs a changer mechanism as its CD block.
-d
Care should be exercised when removing and reinstalling it.
All
wiring should be returned to the original position after work is completed.
First have ready many the new FIXERS (61 4246 5271) for replacement.
Arrange the lead wires so that they are not near the heat sink.
Remove any discs that are loaded in the CD changer.
Before disassembling the unit, set the POWER switch to the “OFF” position
and wait 10 seconds while the CD chanqer mechanism enters standby status.
Then unplug the unit and beqin the disassembly
procedure.
SPEAKER BOX
mm
CABINET
(1) Remove the battery lid.
(2) Remove the 6 rear cabinet mounting SCI
T
P ~~
;@
d
I
d
h
‘ews.
d.
TUNER, EQUALIZER P. C. BOARDS
/
EQ
c.
TAPE MECHANISM
b’
w
TOP PANEL
—h
PUSH
I
(2P)
Ill
I
-2-