I
ii
REMOVAL AND INSTALLATION
*
,.
●
●
●
●
●
●
a.
This CD-radio-cassette player employs a changer mechanism as its CD block.
Care should be exercised when removing and reinstalling it.
All wiring should be returned to the original position after work is complete=
4
First have ready many the new FIXERS (61 4246 5271) for replacement. %
Arrange the lead wires so that they are not near the heat sink.
.
Remove any discs that are loaded in the CD changer.
...
Before disassembling the unit, set the POWER switch to the “OFF” positio~”
and wait 10 seconds while the CD changer mechanism enters standby stat&..
Then unplug the unit and begin the disassembly
procedure.
-2
CABINET
(1) Remove the battery lid.
(2) Remove the 8 rear cabinet mounting screws.
4.
--
c. CD CHANGER MECHANISM
BLOCK & P. C. BOARDS
—/’-’--k
.
b.
TAPE MECHANISM
s---
.,
.\. y
I
J
–2-
To Next Page
Loading...
