.
REPLACING THE PRINCIPAL PARTS OF THE CD CHANGER MECHANISM
9.
●
(a)
APPLYING GREASE
Apply small amounts of grease to the designated areas to ensure proper changer operation.
d
WORM GEAR (366), DISC CASE GUIDE SHAFT
. Apply “SANCOL” (C FD-703) to the
disc case guide shaft.
● AISO apply “SANCOL” (CFD-703) to
the gap between the disc case and
the disc case guide shaft.
● Apply FLOIL (G-425A) to the center
portion (about 10
mm) of the worm
gear (366).
WORM GEAR(366)
-20-
To Next Page
Loading...
