Sanyo MDF-236 - SPECIFICATIONS

22
SPECIFICATIONS

Name Biomedical Freezer
Model MDF-136 MDF-236 MDF-436
External dimensions W640 x D687 x H881 (mm) W905 x D687 x H881 (mm) W1265 x D807 x H905 (mm)
Internal dimensions W525 x D440 x H715 (mm) W790 x D440 x H715 (mm) W1140 x D550 x H735 (mm)
Effective capacity 138 L 221 L 426 L
Exterior Polyester finish baked on zinc galvanized steel
Interior Colored aluminum plate
Door Polyester finish baked on zinc galvanized steel
Insulation Rigid polyurethane foamed-in place (CFC-FREE)
Baskets Polyethylene coated steel wire
Access port Diameter 17 mm, Right side and bottom left
Compressor Hermetic type, 175 W Hermetic type, 350 W
Condenser Wire and tube type
Fin & tube + wire & tube type
Fan motor 2W
Evaporator Aluminum tube on sheet type
Refrigerant R-404A
Temperature controller Electronics controller (between -18 and -40
o
C)
Temperature display Digital display (between -50 and +50
o
C)
Temperature sensor Thermister sensor
Temperature alarm Flash of digital indicator and alarm lamp, Buzzer, (Remote alarm)
Accessories Key 1 set, Scraper 1, Basket 2 (MDF-136), 3 (MDF-236), 4 (MDF-436)
Weight 45 kg 54 kg 71 kg
Battery
For power failure alarm, Nickel hydrogen battery, DC 6V, 1100mAh, Automatic charge
Optional component
Automatic temperature recorder (MTR-G85)
Mounting kit for automatic temperature recorder (MDF-S740)
Baskets
Note:Design or specifications will be subject to change without notice.


















