Sanyo MDF-U500VX - Performance Specifications; Performance Metrics

- 3 -
㩷
㩷
㩷
Item MDF-U500VX / MDF-U500VXC
Key Lock function
Activates on LED digital display.
Password is settable.
Self diagnosis function
In the event of any failure among temp. sensor, AT sensor, Comp.
sensor, message is displayed, intermittent buzzer beeps and remote
alarm activates.
Power source
voltage is
abnormal
Message emits when power supply voltage is 15% lower than rated
power supply.
Ambient temp.
is abnormal
Message emits when ambient temperature is equal or higher than
35㷄, and equal or lower than 0㷄.
Status
monitor
function
Notice of
overload run
Message emits when compressor keeps operation for 5 days.
Compressor protection
When temperature in Comp. sensor is equal or higher than +65㷄,
compressor turns off.
Overload relay
㩷
㩷
ŶPerformance specifications
Model MDF-U500VX
Cooling performance Center of chamber; -80㷄䋨AT30㷄, no load䋩
Temp. control range -50㷄䌾-86㷄䋨AT30㷄, no load䋩
220VAC, 50Hz 220VAC, 60Hz 230VAC, 50Hz 240VAC, 50Hz
Rated power consumption
1140W 1400W 1185W 1240W
Noise level 53 dB (A) (background noise; 20dB)
Maximum pressure 2920 kPa
Model MDF-U500VXC
Cooling performance Center of chamber; -80㷄䋨AT30㷄, no load䋩
Temp. control range -50㷄䌾-86㷄䋨AT30㷄, no load䋩
220VAC, 60Hz
Rated power consumption
1400W
Noise level 53 dB (A) (background noise; 20dB)
Maximum pressure 2920 kPa
Note: Specifications will be subject to change without notice.