- 65 -- 65 -
1
CONTENTS
INTRODUCTION P. 2
PRECAUTIONS FOR SAFE OPERATION P. 3
ENVIRONMENTAL CONDITIONS P. 7
FREEZER COMPONENTS P. 8
Control panel P. 10
REMOTE ALARM TERMINAL P. 11
AIR INTAKE PORT P. 11
INSTALLATION SITE P. 12
INSTALLATION P. 13
START-UP OF UNIT P. 14
Operation after power failure P. 14
FUNCTION OF CONTROL PANEL P. 15
BASIC SCREEN OF CONTROL PANEL P. 16
RUNNING OPERATION (MENU/Set) P. 17
Chamber temperature setting (Temperature) P. 18
Alarm temp. setting (High Alarm/ Low Alarm) P. 19
Alarm delay time setting (Alarm Delay) P. 20
Ring back of alarm buzzer setting (Ring Back) P. 21
Key lock function P. 22
Key lock release function P. 23
VARIOUS SETTING (MENU/Log)
Display of log (Log) P. 24
Indication of log and transmission P. 25
VARIOUS SETTING (MENU/Tools)
Initialization (Tools/ Default Setting) P. 27
Set of date, time, log interval (Tools/Date Time) P. 28
Set of door alarm delay time (Tools/Door Delay) P. 29
Set of log interval (Tools/Log Interval) P. 30
Change of compressor delay time (Tools/Comp. Delay) P. 31
Set of key lock password (Tools/Key Lock PW Setting) P. 32
ALALRM BUZZER P. 32
MONITOR OF FREEZER STATUS P. 33
ALARMS & SAFETY FUNCTIONS P. 34
ROUTINE MAINTENANCE
Cleaning of cabinet P. 36
Defrosting of inside wall P. 36
Cleaning of air intake port P. 37
REPLACEMENT OF BATTERY P. 38
TROUBLESHOOTING P. 39
DISPOSAL OF UNIT P. 40
Recycle of battery P. 40
TEMPERATURE RECORDER (OPTION) P. 45
BACK-UP SYSTEM (OPTION) P. 47
MOUNTING OF INTERFACE BOARD (OPTION) P. 48
MOUNTING OF LAN INTERFACE BOARD (OPTION) P. 49
SPECIFICATIONS P. 50
PERFORMANCE P. 51
SAFETY CHECK SHEET P. 52
To Next Page
Loading...
