Sanyo MDF-U500VX - Page 90

- 87 -
23
0
1
0
2
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
2
2
2
3
2
4
2
5
2
6
2
7
2
8
2
9
3
0
3
1
3
2
3
3
3
4
3
5
3
6
3
7
3
8
3
9
4
0
1
T e mp . S e t t i n g
K e y L o c k
2
T e m p e r a t u r e - 8 0
o
C ( - 5 0
o
C - -90
o
C )
3
H i g h A l a r m + 1 0
o
C ( + 5
o
C - + 2 0
o
C )
4
L o w A l a r m - 1 0
o
C ( - 5
o
C - - 2 0
o
C )
5
䌁
l a rm D e l a y 15min (0-15min)
R i n g B a c k 3 0 m i n ( 0 . O F F 1 - 9 9 m i n )
6
K e y L o c k 0 P a s s w o r d
RUNNING OPERATION (MENU/Set)
Key lock release function
Table 7. Procedure for key unlock setting (Change from Lock to Unlock) (The duration is set in
0000 at the factory.)
Description of operation Key operated Indication after operation
1 -----
The top screen displayed
2
Press the MENU key.
MENU
The menu window is indicated. And the
“set” is highlighted.
3
Press the ENTER key.
ENTER
The temp. setting window indicated. And
current chamber temperature is
highlighted.
4
Select Ring Back item pressing
Shift keys.
The set value 1 of the key lock (Key Lock)
is highlighted.
5
The number input key is pressed in
order to 0. And press the ENTER
key.
Key lock (Key Lock) is changed from 1 to 0.
And Password is indicated on the right of
the numerical value. (Refer to the
following.)
6
The number input key is pressed in
order to 0000. And press the
ENTER key.
"****" is indicated in the password input
column (Password). (An input password is
not indicated with a number.)
7
Press the MENU key.
MENU
The menu window is indicated. And the
“OK” is highlighted.
8
Press the ENTER key.
ENTER
A key lock is canceled, and a Top Screen
window is indicated.
The following screen is indicated when input of a password (Password) during the key lock (Key Lock)
release operation requires it. (The process 5 of the table 7)
1. Password (Password) input column : When 0 is input, this screen is indicated for a key lock (Key
Lock) release. Input the password set up in "the password (Password) input column" with a number
input key.
Note :
The buzzer sounds if a password is wrong. Again, input a password. A user should manage a
password with all of the members. Factory setting is 0000. Refer to P.32.
Contact Sanyo sales representative or agent at the time when a password is forgotten.
1. On the temperature setting screen (Temp. Setting), input 0 in the “Key Lock” field, and press the
enter key (ENTER).
2. The cursor is moved to the password column (Password). Input 4-digit password and press the
enter key (ENTER). The buzzer sounds shortly and the key lock is released. The “Key Lock” indication
of the temperature setting screen (Temp. Setting) disappears.
0 ENTER
1
0
0 0
0
ENTER