− 5 −
Specification
MDF-U537
Items Specification
Model description Biomedical freezer
Model Number MDF-U537
Outer dimension (Max) W 804 × D 772 × H 1802 mm
Inner dimension W 658 × D 607 × H 1272 mm
Effective chamber capacity 482 lit.
Exterior Zinc galvanized steel w/powder polyester coating (PCM)
Interior Polystyrene resin
Insulation Rigid polyurethane foam
Outer door
Zinc galvanized steel w/powder polyester coating (PCM)
2 pcs (upper and lower compartment)
Latch 2 pcs
Door lock 1 pc
(M) 6 pcs (upper compartment)
Inner dimension:
W
290×
D
536×
H
136 mm
Basket
(S) 8 pcs (lower compartment)
Inner dimension:
W
290×
D
536×
H
100mm
Accessories
Others Defrosting spatula 1 pc, key 1 set, 14 card holders
Caster 4 pcs
Leveling legs 2 pcs (with caster)
Access hole φ 30mm. 1 place on rear.
Weights 131 Kg
Evaporator Tube on sheet type (function both evaporator and shelf)
Condenser Wire and tube type
Compressor Hermetic type 350W
HFC refrigerant
Refrigerant
R-407D
Cooling performance -30℃ (internal 1/2h air temperature, AT:35℃, no load)
-20℃~-30℃
Internal temperature control
range
(AT:5℃~35℃、no load)
Power supply Local voltage