Access and Operation by Web Browser
3. Screen Display and Operation
3-1. [Each Tenant] Screen
After you log in to the Intelligent Controller, or when you use the menu to select [1. Status/Control :
1. Each tenant], a screen such as shown below appears.
New
button
Updates the screen to the latest information.
Menu
Lets you select one of the following screens.
Tree configuration
Shows the indoor unit and tenant structure currently accessed by the Intelligent Controller in a tree
configuration. Clicking on a section changes the display to the selected indoor unit.
In the example shown, clicking on the reverse section (indoor unit 1-1-01-01) will select the individual
indoor unit, and clicking on the tenant name (Tenant001, Tenant002 etc. in the example) will select all
indoor units for that tenant. Clicking on the top of the tree (Tenant in the example) will select all indoor
units of the site.
The following page shows examples for selecting all indoor units for a tenant and all indoor units of a
site.
INTELLIGENT CONTROLLER
1.Status/Control:1.Each tenant
1.Each tenant
2.Each tenant details
5.All units
7 - 112
Mini ECO-i System
Remote Control Functions
7
6. Intelligent Controller
(SHA-KT256BG)
06-408 Mini_ECOi_SM7 11/10/06 7:24 PM Page 112
To Next Page
Loading...
