PDG-DWT50L
- 75-
8-2-3 Resetting the Lamp Hours Counter
After replacing the lamp(s), the lamp hour counter(s) should be reset to zero. Refer to the following guide:
1.
Press the Menu button on the
OSD control panel or
Remote Control to open the
Main menu.
2.
Press the ▲or▼ button
to
move to the Reset menu and
press Select.
3.
The Reset menu is displayed.
Select Clear Lamp 1 or
Clear Lamp 2 as required
using ▲or▼ and press
Select.
4.
A confirmation box is
displayed. Select OK using
◄ or ► and press Select to
reset the selected Lamp hours
to zero.
To Next Page
Loading...
