Sanyo PLC-XW57

Video Input
34
Input Source Selection (Video)
Direct Operation
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Press the Point
◄► buttons to move the red
framed pointer to the Input Menu icon.
Press the Point ▲▼ buttons to move the red arrow
pointer to Video and then press the SELECT
button.
1
2
Menu Operation
Move the pointer to
Video and press the
SELECT button.
Input Menu
Input Menu icon
Video
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Top Control
INPUT button
Computer 1
Computer 2
Video
 Note:
- When the Input Search function is set On1 or On2,
the input signal will be searched automatically.
(p.45)
- Computer 2 is not displayed when the COMPUTER
IN 2/ MONITOR OUT terminal is set as Monitor
out. (p.45)