EasyManua.ls Logo

Sanyo RM-5090 - Wake-up Time Setting

Sanyo RM-5090
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LISTENING TO THE RADIO
1. Set the function switch to ON.
2. Set the BAND switch to AM or FM.
3. Turn the TUNING control to tune in a station.
4. Adjust the VOLUME control as desired.
5. To turn the radio off, set the function switch to OFF.
Aerials
- For AM reception, rotate or relocate the unit to a different position to improve the recep-
tion of a distant or weak station.
- For FM reception, a short wire aerial is provided. Unwind the short wire aerial and
extend it to full length.
WAKE-UP TIME SETTING
Example:
To set the wake up time AM 7:30
1. Set the function switch to OFF.
2. While holding the ALARM button down, push the HOUR or MIN button respectively to
select the wake-up time.
3. Release the ALARM button.
NOTE:
If you want to check the time setting, simply push the ALARM button.
5
PM
RM-5090/AU 10/05/2003, 9:496

Related product manuals