EasyManua.ls Logo

Sanyo RM-5090 - Using the Wake-up Timer; Snooze Mode

Sanyo RM-5090
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USING THE WAKE-UP TIMER
1. If you want to wake up with the radio, tune in the station and adjust the volume level
first.
2. Set the wake-up time. (See “WAKE-UP TIME SETTING”.)
3. Set the function switch to ALARM-RADIO or ALARM-BUZZER.
ALARM-RADIO: Wake up with the radio
ALARM-BUZZER: Wake up with the buzzer.
The ALARM indicator lights. The timer is set.
When the timer ON time arrives, the radio or buzzer will sound for approximately 1 hour and
59 minutes and then turn off automatically. The wake-up timer will function every day un-
less it is released.
To stop the radio or buzzer, push the ALARM button.
To release the timer, set the function switch to OFF.
SNOOZE MODE
During the wake-up timer is operating, press the SNOOZE button. The radio or buzzer
will stop for approximately 9 minutes but will start again and this will be repeated.
NOTES:
- If the SNOOZE button is not pressed, the radio or buzzer will sound for approxi-
mately 1 hour and 59 minutes and then turn off automatically.
- To cancel the snooze mode, push the ALARM button or set the function switch to
OFF.
6
RM-5090/AU 10/05/2003, 9:497

Related product manuals