USING THE SLEEP TIMER
1. Set the function switch to OFF, ALARM-RADIO or ALARM-BUZZER.
2. Push the SLEEP button.
“0:59” (59 minutes) appears. The radio turns on and will turn off automatically after 59
minutes.
- To select the desired time, while holding the SLEEP button down, push the HOUR
(once) or MIN button repeatedly to select the sleep time (up to 1 hour and 59
minutes). Release the SLEEP button.
NOTES:
- To release the sleep timer while in operation, push the SNOOZE button.
- If the SLEEP button is pushed while in operation, it returns to “0:59” as above.
USING THE SLEEP TIMER AND WAKE-UP TIMER
1. Set the wake-up time and select ALARM-RADIO or ALARM-BUZZER.
(See “WAKE-UP TIME SETTING” and “USING THE WAKE-UP TIMER”.)
2. Set the sleep time. (See “USING THE SLEEP TIMER”.)
3. Tune in a station and adjust the volume level as desired.
7
RM-5090/AU 10/05/2003, 9:498
To Next Page
Loading...
