Sanyo SAP-K181GJH - Other Component Specifications

2-3. Other Component Specifications
8
4-way Valve (Solenoid coil) LB64012 (Coil), V26-110B (Valve)
Coil rating AC 220-240V, 50/60Hz, 6W
Coil resistance Ω (at 20°C) 2,000 ± 7%
Thermostat (Fan Speed Control 23S) MQT5S
Switching temp. °C
high ➞ LOW 28.5°C ± 1.5
low ➞ HIGH 31.5°C ± 2
Contact rating AC 220V, 3A
Thermostat (Defrost thermo. 23D) TRS02-12MSR
Operating temp. °C ON 12 ± 2
Diff. 8 deg. below
Starting Relay (SR) AMVL300A
Coil rating AC 300V, 50Hz
Coil resistance kΩ (at 23°C) 13.3 ± 2%
Contact rating 20A AC
Operating voltage AC 185 – 217V, 50Hz
Return voltage AC 60 – 120V, 50Hz
Power Relay (PR) G4F-1123T-US
Coil rating DC 24V
Coil resistance Ω (at 20°C) 640 ± 10%
Contact rating AC 240V, 20A
Outdoor Unit SAP–C181GH
SAP–C241GH
Thermistor (Room sensor) DTN-TKS142B
Resistance kΩ 25°C 5.0 ± 3%
Thermistor (Coil sensor) DTN-TKS131B
Resistance kΩ 0°C 15.0 ± 2%
Transformer (TR) ATR-J105
Rating Primary AC 230V, 50Hz
Secondary 19V, 0.526A
Capacity 10VA
Coil resistance Ω (at 21°C) Primary (WHT – WHT): 205 ± 10%
Secondary (BRN – BRN): 2.0 ± 10%
Thermal cut-off temp. 150°C
Indoor Unit SAP–K181GJH
SAP–K241GJH