EasyManua.ls Logo

Sanyo SAP-K18AM - Page 22

Sanyo SAP-K18AM
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Phenomenon Troubleshooting
Indoor unit can't deliver air.
Moisture on air outlet vent.
• If unit is running under the high humidity for
a long time, the moisture will be condensed
on the air outlet grill and drip off.
• In HEAT “ ” mode, when indoor heat
exchanger’s temperature is very low, to stop
below the cool wind (within 3 mins).
• In HEAT “ ” mode, when outdoor temp.
is very low or high humidity, there are much
frost on the outdoor heat exchanger, unit will
automatically defrost, Indoor unit stop
blowing fan 3 - 12 minutes.
During the de-frosting, there is water flowing
out vapor be produced.
• In dehumidifying “ ” mode, indoor fan
sometimes will stop, in order to avoid
condensing water be vaporized again,
temperature raising.
6. TROUBLESHOOTING
Operation and Maintenance

Related product manuals