Sanyo TP-X1000 - RECORDING COMPACT DISCS; Computer recording overview; Types of edit recording operations; Auto edit recording

RECORDING COMPACT DISCS
Computer recording
Select “CD” as the function and check that the stop
mode is established for both the CD player and deck 2,
Then, simply by pressing the COMPUTER REC switch,
the system automatically performs the operations be-
low, and the CD play and recording start at the same
time.
Deck 2:
Automatic tape rewinding.
Then recording starts.
CD player:
Automatic searching of the beginning of the track to
be recorded.
Then pause mode is established.
The REC/PAUSE, DECK 2 and
➤ indicators light, “PIAY”,
“COMPUTER REC”, “SPACE” and “SIDE A“ displays at
starting the recording.
Types of edit recording operations
The following edit recording operations can be per-
formed by computer recording. Recording can be made
even from plural discs.
A. Auto edit recording
B. Programme edit recording
C. Fade-out edit recording
D. Backward skip edit recording
Note:
Recording starts automatically after 8 seconds so
that the recording will not be interrupted by the leader
tapes on tape sides A and B.
Material can be recorded with unrecorded blanks
lasting 5 seconds created automatically.
The highest track number which can be edited is 32.
Track numbers 33 and above cannot be edited (ex-
cept backward skip edit).
To stop computer recording at any time, press the
STOP switch of the CD player or deck. Both CD player
and deck 2 are now set to the stop mode.
(The auto, programmeorfade-out editing mode is still
operational.)
To release the editing mode, press the STOP switch
on the CD player.
Set the MODE switch to” ~ “during the computer
recording.
To record material from an interim position on the
tape, proceed with manual recording.
Auto edit recording (Fig. 13)
The tracks are recorded with no change in the track
sequence.
Example:
To record all the tracks on a 5-track disc (total play time
of 47 min 20 see) on DISC 2 onto a 50-minute tape
1. Press the DISC 2 switch.
2. Press the EDIT switch to select to the recording tape
length. The CD display indicates as:
DISC 2 C46 EDIT SPACE SIDE A
123...
Every time it is pressed, the tape length display
changes in the following sequence:
C46 - C-60 - C-90 - (Released) - C46 -...
3.
To set the desired tape length up to C-99, use the +1 O
and O-9 switches on the remote controller. To set “C-
50”, press the +10 switch 5 times then press the O
switch. “C-50” displays.
- The w or wi switch on the remote controller or
the SKIP/SEARCH switches on main unit can be
used for the setting.
Press the COMPUTER REC switch.
Recording then starts automatically from track 1 on
disc 2.
PLAY EDIT COMPUTER REC SPACE SIDE A
DISC 2 TRACK 1 INDEX 1 EACH 0.01
123...
The editing mode remains operational even upon
completion of play. To release this mode, press the
STOP switch.
Program me edit recording (Fig. 14)
The programmed can be rearranged and edited on the
tape in the desired order within the confines of the
selected tape length.
Example:
The following tracks are to be recorded.
Track 5 on DISC 1:10 min 00 sec
Track 2 on DISC 1:7 min 26 sec
Track 3 on DISC 3:4 min 37 sec
Track 1 on DISC 3:11 min 09 sec
Track 4 on DISC 2:9 min 21 sec
Track 7 on DISC 2:1 min 10 sec
These tracks are recorded in the following programme
on a 46-minute tape.
Track 5 on DISC 1-2 on DISC 1-3 on DISC 3- (auto
reverse) -1 on DISC 3-4 on DISC 2-7 on DISC 2
1.
2.
3.
4,
5.
6.
7.
8.
9.
10.
Press the EDIT switch until “C46” is displayed.
Press the DISC 1 switch.
Press the MEMORY switch. “[PROG.]” blinks, and
the display indicates as:
EDIT SPACE SIDE A [PROG.]
DISC 1 TRACK AL STEP 1 REMAIN 23.00
123...
The remaining time on side A blinks (or appearel
on the time display.
Press the number switch 5 on the remote controller
to display “5” at TRACK.
DISC 1 TRACK 5 STEP 1 REMAIN 13,00
123...
Press the MEMORY switch. “[PROG.]” remains lit.
DISC 1 TRACK 5 STEP 1 REMAIN 13,00
5
Press the switch 2 to display “2’ at TRACK “[PROG.]”
blinks.
DISC 1 TRACK 2 STEP 2 REMAIN 5.29
5
Press the MEMORY switch. “[PROG.]” remains lit.
DISC 1 TRACK 2 STEP 2 REMAIN 5.29
25
Press the DISC 3 switch.
Press the switch 3 to display “3” at TRACK.
Press the MEMORY switch.
-17-