Need help?Do you have a question about the Sanyo TP-X1000 and is the answer not in the manual?
Initial setup and precautions before operating the main unit.
Connecting the unit to a power source and setting the voltage selector.
Connecting FM, SW, and MW/SW1 loop aerials for optimal reception.
Connecting speakers to the unit, ensuring correct polarity.
Connecting turntable and external DC power source.
Controls for radio tuning, clock, and timer functions.
Controls for volume, balance, and sound quality adjustments.
Controls for tape playback, recording, and dubbing operations.
Controls for CD playback, disc selection, and programming.
Overview of buttons and functions on the remote control.
Step-by-step guide to setting the current time on the unit.
Guidelines for handling, storing, and cleaning compact discs.
Steps for loading discs into the CD player tray.
How to start playing a CD, including selecting discs and tracks.
How to program a custom playback order for tracks.
Steps for loading tapes and starting playback on deck 1 or 2.
Manually tuning and saving radio stations to memory.
Instructions for setting up deck 2 for recording purposes.
Automated CD to tape recording process.
Different methods for editing recordings from CDs.
Recording tracks in their original sequence from CD to tape.
Introduction to ON/OFF, Wake Up, and Sleep timers.
Setting ON/OFF times and sources for unattended operation.
Technical details for the tuner section.
Technical details for the cassette deck.
Technical details for the CD player.
Technical details for the TP-X1000 turntable.
To Next Page
General
